Restuccoing Project Southaven MS

If you’re stuck with stucco, there-application method involves layering several different coats of stucco tocomplete the process. Applying drywall may only require a couple passes withjoint compound and then some sanding. Read on for more details.

Polk Masonary Contractors
(601) 856-7758
210 Industrial Dr
Ridgeland, MS
 
The King Chimney Cleaning
(601) 922-2286
1203 Westhaven Blvd
Jackson, MS
 
Ingram Plastering & Co Inc
(601) 366-5045
1322 Simwood Pl
Jackson, MS
 
Gordon Masonry
(601) 206-1829
407 Briarwood Dr Ste 207b4
Jackson, MS
 
ELLIS MASONRY INC
(601) 932-9600
1165 Weems St
Pearl, MS
 
Southeastern Stone & Flooring
(601) 829-0677
643a Holly Bush Rd
Brandon, MS
 
Santa's Friend Chimney Service
(601) 854-7563
110 Knight Pl
Brandon, MS
 
Quality Foundation Inc
(601) 750-2713
178 Minninger Blvd
Madison, MS
 
Moss Larry
(601) 829-3396
120 Gabelwood Trl
Brandon, MS
 
Gregory Masonry
(601) 400-5455
200 E Capitol St
Jackson, MS
 

Restuccoing Project

Provided by: 
Find contractors for kitchens, baths, additions, window replacement and more...

Restuccoing can be a difficult task to tackle by yourself. Photo Credit: Jeremy Levine Design

The process of restuccoing versus applying drywall is very different. Stucco is an ancient building material that became popular in California, the Southwest, and Florida. During a post-war building boom of the 1950s and 60’s, stucco homes sprang up in large communities throughout most of California .

If you’re stuck with stucco, the re-application method involves layering several different coats of stucco to complete the process. Applying drywall may only require a couple passes with joint compound and then some sanding. Obviously the biggest difference between the two is stucco goes on wet, and requires a skilled craftsman to texture it.

  • Restuccoing walls can be a very detailed job, but it’s necessary if layers of paint have been applied to the walls. It’s important to remove the paint. New stucco cannot adhere to paint by itself, sandblasting exterior walls or adding stucco adhesion to the interior walls will solve the problem.
  • The new stucco will create a whole new appearance, plus, it seals cracks and prevents future deterioration. Three separate coats should be applied. The first is called a “scratch” coat. Followed by the “brown” or second coat, and then finally the finishing coat is applied.  Some contractors used just two to save time and money. Synthetic stucco can be used as well. This type of stucco is a little more water resistant than the natura...

Read the full article in the CalFinder Remodeling and Home Solar Power Magazine

© 1996-2010

Contemporary Media
460 Tennessee Street, 2nd Floor | Memphis, TN 38103
Visit our other sites: Memphis Magazine | Memphis Parent | Memphis Business Quarterly
Powered by Foundation